This electric submersible pump is ideal for providing representative samples due to the low RPM motor and user controlled flow rate. Our positive displacement gear pumps are machined from stainless steel and Teflon* in the interest of purity. Water enters the pump through a 50 mesh screen into a stainless steel cavity. Two Teflon* rotors sit in the stainless steel cavity and push the water up the hose in a steady stream. The low RPM motor protects sample integrity. Efficient low maintenance pump is ideal for both remote field work and long term monitoring projects. No need for a "cool-down" period to prevent the motor from overheating as long as the pump is immersed in water. Designed for 2" and larger monitoring wells.
Dimensions: 1.75" diameter x 9" length
Materials: 304 stainless steel and Teflon*
Voltage Requirements: 36V DC
Lift Capacity: 200'
Operating Temperature: 0-40° C
Durable aluminum briefcase controller features a variable speed control dial to accurately meet low flow parameters. Includes a built in power supply to allow the operator to power the pump from any 110V AC source. Optional 36V DC power port for powering from external battery pack.
Input 110V AC / Output 36V DC
Variable speed control
Amp Meter
7 Amp breaker
Forward / Off / Reverse Switch
Also available for 220V AC, 50 Hz. Input / 36V DC Output
Low clearance PVC waterproof well cap available for 2" or 4" wells . Well cap includes stainless steel couplings for discharge line. An extra 7/8" port allows for inserting other instruments into the well. The discharge hose (included) stores in the well. Pump / Hose / Well cap snap together via quick connect couplings for simple installation. Our Portable Power Supply Control Case (see above) plugs into this well cap to operate the pump.
Materials: PVC cap, stainless steel couplings, viton o-rings
Size: 2" or 4" well caps (specify schedule of casing)
Hose Length: Customer specifies exact length.
Designed exclusively for Fultz Pumps, Inc.; this hose has the power lead built into the wall of the hose. This streamlined hose allows for easy installation. For our portable systems, this hose simplifies the decon process by eliminating the need to decon a power lead and separate tubing. Available in Polyethylene and Teflon* lined polyethylene. The Teflon* lined version has an extremely durable inner Teflon tubing that remained fully adhered to the outer layer of Polyethylene during our in-house testing.
Dimensions: 3/8" ID
Materials: Polyethylene or Teflon* lined polyethylene
Length: Customer specifies exact length
This power supply inputs 110V AC and outputs 36V DC required to run the pump.
Dimensions" 5" x 5-1/2" x 6"
Weight: 7 lbs. 4 oz.
This inverter allows the operator to power the pump from the vehicle battery. The alligator clips attach to the vehicle battery terminals. Input 12V DC / output 110V AC. You then plug our Portable Power Supply Control Case or our 110V Power Supply into this inverter to power the pump.
600W Continuous Use
Weight: 3 lbs.
This detachable check valve is useful for projects where the hose cannot be allowed to empty back into the well. The check valve is inserted between the pump and hose connections.
Materials: Stainless steel and Teflon*
Our positive displacement pump head uses two rotors machined from virgin Teflon* to displace the water up the hose in a steady stream. We use Teflon* in the interest of purity. This is the only component in our pump system that requires any routine maintenance. These rotors are field replaceable and reasonably priced. The field technician only needs a screwdriver and a pair of needle-nose pliers to change the rotors. Changing rotors when the pump's performance begins to fade will make the pump perform like new again.
This stainless steel Y-Connector accessory allows the sample to be split for two discharge hoses. A female quick connect coupling allows the Y-Connector to easily attach to the pump. The discharge hoses attach via two quick connect couplings (one female coupling is included as pictured). The wire extension is also included and allows for easily connection of the power lead.
* Teflon is a registered trademark of E.I. Dupont.
Specifications subject to change without notice.